搜索结果: 1-15 共查到“工学 Manufacturing”相关记录152条 . 查询时间(0.125 秒)
A novel method for squeezing molecules together could significantly reduce chemical manufacturing waste（图）
Mechanical Engineering Energy Science Research
2023/6/27
The production of chemicals accounts for 40% of all energy currently used in manufacturing, and the process also results in toxic solvent waste that pollutes the environment and poses health risks to ...
When medical companies manufacture the pills and tablets that treat any number of illnesses, aches, and pains, they need to isolate the active pharmaceutical ingredient from a suspension and dry it. T...
Moving perovskite advancements from the lab to the manufacturing floor（图）
钙钛矿 太阳能组件 太阳能电池 制造车间
2023/6/5
The following was issued as a joint announcement from MIT.nano and the MIT Research Laboratory for Electronics; CubicPV; Verde Technologies; Princeton University; and the University of California at S...
A novel combination of artificial intelligence and production techniques could change the future of nanomedicine, according to Cornell researchers using a new $3 million grant from the National Scienc...
Chemical reactions that are driven by light offer a powerful tool for chemists who are designing new ways to manufacture pharmaceuticals and other useful compounds. Harnessing this light energy requir...
Engineers enlist AI to help scale up advanced solar cell manufacturing（图）
人工智能 太阳能电池 钙钛矿材料 光伏电池 机器学习
2023/6/7
Perovskites are a family of materials that are currently the leading contender to potentially replace today’s silicon-based solar photovoltaics. They hold the promise of panels that are far thinner an...
中山大学材料科学与工程学院王山峰教授团队《Additive Manufacturing》：一种可超快打印组织工程支架的光固化树脂（图）
不饱和聚酯 王山峰教授 超支化反应型稀释剂 微立体光刻技术 3D打印技术
2022/6/10
近日，王山峰教授团队创新地使用超支化反应型稀释剂去优化聚富马酸丙二醇酯（PPF）树脂，充分利用了面投影微立体光刻技术的快速制备优势，实现了可降解、无细胞毒性组织工程用多孔支架的超快、高精度打印，同时显著提高支架结构的模量、韧性、和形变回复率。相关成果以“Projection printing of scaffolds with shape recovery capacity and simulta...
华北电力大学能源与动力工程学院船舶摩擦学研究团队学术论文在复合材料类顶级期刊Composites Part A: Applied Science and Manufacturing上发表（图）
华北电力大学 能源与动力工程学院 船舶摩擦学 研究团队 学术论文 复合材料类 发表
2021/5/14
能源与动力工程学院可靠性与能效控制研究所船舶摩擦学科研团队合作撰写的学术论文“A strategy that combines a hydrogel and graphene oxide to improve the water-lubricated performance of ultrahigh molecular weight polyethylene”被复合材料领域国际顶级学术期刊《Com...
加拿大工程院院士王力翚教授来东华大学机械工程学院作题为“Smart Manufacturing: A KTH Perspective”的学术报告（图）
加拿大工程院 院士 王力翚 教授 东华大学机械工程学院 Smart Manufacturing: A KTH Perspective 学术报告
2019/12/19
2019年12月17日上午，加拿大工程院院士瑞典皇家理工学院王力翚教授应机械工程学院张洁院长邀请，于图文信息中心第三会议室为机械工程学院师生作题为“Smart manufacturing: A KTH Perspective”的报告，本次报告由机械工程学院鲍劲松教授主持。王力翚教授是加拿大工程院院士、瑞典皇家理工学院可持续生产系统首席教授，是《Robotics and Computer-Integ...
中国地质大学科学技术发展院赵思佳(硕士研究生)，周克清*等，工程学院 Available online 25 April 2019，Composites Part A:Applied Science and Manufacturing, In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy
层状；二硫化钼；二维纳米；结构；优异
2021/10/20
近日，国际著名学术期刊《Composites Part A: Applied Science and Manufacturing》在线刊发了中国地质大学工程学院周克清副教授团队的研究成果——“In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy”。该文第一作者...
IUTAM Symposium on When topology optimization meets additive manufacturing – theory and methods
IUTAM Seminar Topology optimization Additive manufacturing Theory methods
2017/12/13
IUTAM Symposium on When topology optimization meets additive manufacturing – theory and methods.
4M was established as a Network of Excellence under the European Framework Program 6 (FP6) to develop Micro- and Nano- Technology (MNT) for the batch-manufacture of micro-components and devices in a v...
2018年SPIE激光3D制造会议（SPIE Laser 3D Manufacturing V）。
第二届先进制造业数据分析研讨会（2nd Symposium on Data Analytics for Advanced Manufacturing）
第二届 先进制造业 数据分析 研讨会
2017/11/28
The manufacturing industry, which is vital to all economies, is being challenged to improve its efficiency across the product life cycle and the value chain. The critical aspect of “smartness” is enab...
2018第9届机电一体化制造国际会议（2018 9th International Conference on Mechatronics and Manufacturing）
2018 第9届 机电一体化 制造 国际会议
2017/11/28
The 2018 9th International Conference on Mechatronics and Manufacturing (ICMM 2018) will be held in Phuket, Thailand during Jan 27-29, 2018. This conference will provide a remarkable opportunity for t...